Absolute vs Incremental Closed-Loop Stepper: How to Choose
2026-11-12
Absolute vs Incremental Closed-Loop Stepper | Comparison Guide
Confused between absolute and incremental closed-loop steppers? This article compares working principle, homing, wiring and suitable machines with field cases and FAQ.
When selecting closed-loop stepper motors, machinery builders often wonder whether to pick incremental or absolute versions. Both adopt encoders to eliminate missed steps of open-loop steppers, yet they differ greatly in homing logic, wiring, fault tolerance and applicable scenarios. A poor choice may raise commissioning difficulty or restrict machine functions.
Incremental closed-loop steppers track position by counting pulses. Homing is mandatory after power-on to establish position reference with a home sensor. Once power fails or emergency stop triggers, position data is lost and homing must be repeated. It is cheaper and suitable for simple conveyors and basic positioning jigs where homing is acceptable.
Absolute closed-loop steppers are equipped with multi-turn absolute encoders. They retain position after power loss and read coordinates directly after startup without homing. Home sensors and related wiring can be removed, cutting hardware points and failure risks. This feature is highly valuable for jigs that cannot run homing, frequently cycled inspection machines and vertical axes.
For steady constant-speed positioning, both perform similarly. However, incremental systems lose reference after unexpected power cuts and require manual reset, while absolute designs avoid this issue.
Absolute closed-loop steppers are not always the best option. If your machine is simple, budget-sensitive and allows automatic homing on startup, incremental closed-loop steppers remain a cost-effective alternative.
For servo substitution, especially AOI and medical sample instruments where homing is not permitted, absolute closed-loop steppers are the mainstream solution. Xlichuan offers both incremental and absolute closed-loop steppers. Absolute kits work with CL2-86P and CL3-E86H, supporting pulse and bus control for small and medium precision automation.
Quick Selection Rule
Choose incremental if homing is allowed and cost is prioritised; choose absolute for vertical axes, frequent start-stop and position retention after power loss.
FAQ
Q: Does an absolute closed-loop stepper require homing on power-up? A: Multi-turn absolute encoders store position data through power cycles. Direct coordinate reading is supported without homing.
Q: Will incremental closed-loop steppers lose position? A: They do not skip steps during normal running, yet position reference is lost after power failure and homing is required again.
Q: Are absolute closed-loop steppers much more expensive? A: Absolute encoder assemblies cost more upfront, yet they save sensors, wiring and commissioning labour for mass precision machines.
Q: Can absolute closed-loop steppers work with EtherCAT? A: Yes. Xlichuan CL3-E86H EtherCAT drives support absolute closed-loop steppers for multi-axis visual equipment.
![]()