logo
Products
News

Selection Guide: EtherCAT Closed-Loop Stepper for AOI Visual Inspection

2026-11-12

latest company news about Selection Guide: EtherCAT Closed-Loop Stepper for AOI Visual Inspection

AOI visual inspection machines demand precise multi-axis synchronous scanning, reliable camera triggering, consistent repeat positioning and strong immunity in noisy workshops. Many builders seek to replace costly high-voltage servos, and EtherCAT closed-loop steppers have become a proven solution for compact AOI jigs.

Compared with pulse control, EtherCAT daisy-chains drives on one bus, cutting pulse wiring, reducing cabling mistakes and signal attenuation. Stable bus cycles maintain synchronisation between axes and match camera timing, lowering false rejects and missed detection.

Key selection tips for AOI:

First, prefer absolute closed-loop steppers. Most AOI lines cannot afford full homing on startup. Absolute encoders retain position and help machines start inspection quickly for higher uptime.

Second, configurable digital I/O is required for camera trigger, probe, limit and home signals. The CL3-E86H EtherCAT drive supports flexible port assignment and fits visual triggering.

Third, anti-interference matters. Workshops are filled with VFDs and switching power supplies. Shielded bus cables and proper grounding deliver better stability than long pulse lines.

Fourth, dynamic performance does not need to match large high-voltage servos. Most AOI tasks are light-load, low-speed point-to-point positioning, well within the capability of closed-loop steppers with lower per-axis cost.

Boundary note: High-speed large-format scanning, heavy payload and ultra-fast capture applications still favour high-voltage servos.

Many South China 3C equipment manufacturers adopt EtherCAT closed-loop steppers for four-axis AOI and visual alignment jigs, replacing original servo systems and easing quotation pressure while keeping yield stable.

FAQ

Q: Is EtherCAT mandatory for AOI?

A: Pulse closed-loop steppers work for simple single-axis visual jigs. EtherCAT brings greater advantages for multi-axis synchronisation and precise camera triggering.

Q: Can EtherCAT closed-loop steppers connect to visual controllers?

A: It works with mainstream motion and visual controllers supporting EtherCAT and CIA402.

Q: Will closed-loop steppers cause missed detection on AOI?

A: Well-tuned absolute closed-loop systems deliver enough repeatability for standard AOI, excluding heavy-load high-speed scenarios.

Q: Does CL3-E86H support camera trigger?

A: Yes. Digital I/O can be customised for camera trigger and probe signals.

Send your inquiry directly to us